PVC U –bar Plastic Cover to Keep Your Asset Scratch -free
Alarm ON/OFF Switch
150-300mm U-Bar Length
Insert the key into the key barrel and rotate clockwise, to take out the u bar steel,
Buckle the lock to your front or rear wheel or other equipment
Turn the key anti-clockwise to lock up.
The lock give a single beep sound. You then have 5 seconds to press the bar to activate the alarm.
After activation, the lock will give a loud warning tone.
If the lock position is changed or if the lock is attacked, the siren will emit 5 beeps as a warning and then emit a loud siren for 15 seconds at the same time smartphone will receive notification. If the lock is left alone it will re-set and re-arm.
To turn off the siren when in alarm mode, insert the key into the key barrel and rotate anti-clockwise to unlock.
Connecting igate with security device, to connect igate with your security device, you must install zovii app on your mobile device, you may download the app from app store or google play store by seaching zovii or scanning the qr code show below, please refer to igate user’s guide for full set up, the user’s guide can be found inside the igate package or on zovii app
HOW TO REPLACE BATTERY
Unlock the lock and remove the u-bar.
Remove the M4 screw inside the lock body.
Take the battery compartment out of the lock.
Open the water proof cover.
Replace the CR2 battery.
Close the cover and reassemble the parts.
Please avoid close proximity to your ears. The extremely loud alarm will damage your hearing if held close to your ears