ZOVII Alarm Disklock ZS6

USER INSTRUCTIONS

1. Insert the key into the key barrel and rotate clockwise, the key barrel will spring out.
2. Slide the lock into your motorcycle’s front or rear brake disc.
3. Locate a hole in the brake disc that will allow the locking pin to pass through and push the key barrel down and turn anti-clockwise to lock up.
   

   a. Brake disc thickness less than 6mm (1/4”). b. Brake disc has a hole whose diameter larger than 6mm (1/4”). Note: the locking pin can pass through any hole on the brake disc (see those dark Areas on the diagram). Area for locking pin

4. The lock give a single beep sound. You then have 15 seconds to press the button to activate the alarm.
5. After activation, the lock will give a loud warning tone.
6. If the lock position is changed or if the lock is attacked, the siren will emit 5 beeps as a warning and then emit a loud siren for 15 seconds. If the lock is left alone it will re-set and re-arm.
7. To turn off the siren when in alarm mode, insert the key into the key barrel and rotate anti-clockwise to unlock.